Would it be possible for you to send me a price list for High pressure sight windows?

The peculiarity of the high pressure sight windows is the specific parameters in any case. It is not possible to foresee. If you want to have the quotation of the high pressure sight window, please fill Request Form. We are ready to send you this form via e-mail.

Similar questions


Synthetic sappire applications
What is application of the Sapphire crystals?
Is sapphire used in lasers?
Can Sapphire be uses as a transparent window?
I would like to know what size tubes you have available, and their pressure rating, I wish to use them as a view pressure vessel, approx 50 - 100ml volume. I would also like some additional information about the preferred method of sealing to 316L stainless steel end plates I need to manufacture. The pressure I am shooting for is approx 350BAR.
I have a question in regards to sapphire and lasers. How does sapphire hold up against lasers. I need to cut some semi transparent film with a laser. I'm using a backlight and a machine vision system to determine where I need to cut, and then use a laser to cut. The focused laser power is less the 2 watts. Do you think sapphire would not ablate with this power of laser?
I would like to use sapphire window in an instrument measuring fluorescence of a fluid in a well. The excitation light would pass through the sapphire window. How much will the sapphire fluorescence compared to fused silica or optical glasses?
We are at this stage working on a prototype laser for subsea use. We need a custom made flange mounted on a clear glass. The glass diameter will be ca 30mm. I am not sure of which type of glass we need for the application. Max pressure will be 15.000psi and max temp 150 degC. Do we need to use a sapphire to get it strong enough or can we go for a glass of lower quality/price? How thick will the glass need to be to be able to handle this type of pressure and temperature? If this product are set in production a Typical order of glass will be 25-50 or 100 pieces, how will this impact on the price?
We've a optical sensor which exists of 2 saphire windows in glued a Stainless steel housing. The windows and the cylindrical SS housing should be one smouth surface. No glue recesses are allowed. Can you grind and/or lappe the surfaces without loosing optical properties?
Would it be possible for you to send me a price list for High pressure sight windows?
I am thinking about using a sapphire lightpipe to reduce the effect ot convection currents in a 1000degC interferometer instrument I am designing. I would need a lightpipe around 40mm across (either circular or rectangular 40mm x10mm). How long a lightpipe would be possible to have made? I would need the end faces to be parallel and polished, but slightly tilted to stop reflections affecting my instrument. As I am using polarised light in my experiment is it possible to select a crystal orientation that will not experience birefringence? I assume as the material is a single crystal that the material properties are very homogeneous.
Which type of sapphire windows are preferable for mounting on combustion chamber at high pressure & temperature?
We'd like to measure some effects on materials in an oven. The product itself can increase temperatures up to 2000°C. I have no idea about the air temperature of the oven. I want to use sapphire as a window for a cooled thermal imaging camera from 3-5µm. Would Sapphire be the right choise? What is the thickness I should take, or is there a maximum diameter? Is it possible to buy just one or two pieces?

<<< back to Frequently Asked Questions List